• True-bypass

• Switch Craft jacks

• Size: width=2.5" depth=4.7" height=2.2"

• Weight: 418 grams

• Power: 9VDC battery or a standard "BOSS" style center pin negative 9VDC power supply

Compress affects the amount of gain reduction (compression) of the input signal. Turning this clock wise will give you up to 30dB of gain reduction (depending on input gain). Please note that the Compulators max gain is 26dB (see Trim Pot) so in some circumstances if your instrument is very hot you could achieve less than unity gain if you turn up the compress knob too much.

Volume increases and decreases the output volume of the Compulator. Use this for level matching between the effected and unaffected signal.

Trim pot sets the gain of the compressor's pre-amplifier. If distortion occurs turn this down until the signal is clean. The unit is set at the factory at 20dB of gain which is perfect for most instruments. If you have weaker pickups or want to push the envelope turn it up to its max gain 26dB.